One Room Challenge Week 3: Finally Getting Somewhere

It’s week 3 of the One Room Challenge and we are finally getting somewhere! Let’s fill you in on all the progress so far.

In order to increase our limited seating we purchased this super cute bench from Target:

target bench finally getting somewhere

However, it really needs a cushion to be comfortable. I purchased a nice one from World Market that was the correct length but when I got it home, realized I didn’t measure the depth. It hung off the edge in a too-weird-to-keep way. I was left to sew my own! Thankfully I had some leftover foam from another project that I could use for this one too.

target bench cushion dog
Charlie highly approved of the comfort of the foam.

After a bunch of tests and trying to sew the tricky curved edges, I finally got something that looked like a cushion! Piled high with decorative outdoor pillows it’s not too shabby for DIY!

target cushion finally getting somewhere

Charlie still approves and this has been his new go-to spot on the deck.

charlie cushion deck diy
Paired with the new rug from World Market I think this seating nook is looking really cute.

Next, onto the giant chalkboard. My boyfriend really wanted somewhere that we could write the menu for the BBQ à la this one we saw in Austin. I went around and around debating how I wanted to pull this off.

chalkboard inspiration

I first looked at metal poster frames and thought of painting the glass with the chalkboard paint. I still think this would look nice in the right setting since it gives you a finished frame and an easy way to hang it with the hangers on the back. However, this is a rental and we don’t want to do too much damage. So I opted out of this since hanging the frame was going to either damage the walls or require hanging something from the top. Back to the drawing board.

That’s when I realized we could get a large piece of plywood (with veneer so it’s really smooth) and paint that with the chalkboard paint. Much cheaper than the frame option and also lets us make it whatever size we wanted. After much debate, I went with 6.5-feet tall by 3-feet wide, which the lumber yard cut to size for me. 

A few pointers from my first time using chalkboard paint:

  1. You want as smooth a surface as possible. Any bumps or texture will show on the chalk. I did a light sanding on the entire face. sanding chalk board
  2. Smooth surface right? So use a tack cloth to get up all that sanding powder.tack cloth finally getting somewhere
  3. Apply paint just like you would on a wall. Go in overlapping sections and try not to over apply. Wait four hours between coats. I ultimately did two coats to make sure it was very opaque.chalkboard paint
  4. Once it is dry, patiently wait three days for the chalkboard to really cure. Before you write on the board for the first time, “season” your board by rubbing the side of chalk on the entire surface.chalkboard season finally getting somewhere

I wanted to add a vinyl design—remember that inspiration image? Since I work in the signage industry, I had a vinyl connection who cut the piece for me. See how you apply it below.

applying vinyl technique

You position the vinyl exactly where you want it and apply a strip of tape to the top that will work as a hinge. Then flip it up, remove the protective backing, flip it back down, and slowly press into position. Done! Download my file for the vinyl at the bottom to cut your own.

Now you’re ready to write! I had some fun adding our Easter BBQ menu plus our friend’s kids thought it was so fun to write on the bottom.

chalkboard write finally getting somewhere

What do you guys think? There’s more to come, but we did a small debut with friends and family at Easter. Any tips on how to maximize every inch of your outdoor space?

one room challenge logoYou can follow along with all the participants with @OneRoomChallenge and #OneRoomChallenge and read all about it at Calling It Home.

See what our fellow guest participants are up to at the link up.

[x_subscribe form=”1812″]
This post contains affiliate links.

Share:

More Posts

Attaching a wood fence to a chainlink fence

As I mentioned in my last fence/gate update post, I helped Erika attach a wood fence to the chainlink fence in her backyard. The process was similar to when I converted a chainlink fence to a wood fence, except in this case, we left the chainlink fence intact. This method is a good option if you want to add a little more privacy to your yard or camouflage a chainlink fence while you wait to save up for a completely new fence. 

Gift Guide: Indoorsy

Struggling to find gift ideas for your favorite people? We’ve got you covered with our And Then We Tried gift guide! First up: your friends and family who are decidedly indoorsy. While we can’t claim to be experts on much, things to buy people who like to stay inside is definitely in our wheelhouse.

and then we tried obsessions 10.19.18

Obsessions: 10.19.18

You wanna know what we have been decidedly NOT obsessed with in the past month? The blog. Womp womp. We’re hopping back in this week, but we’ll be posting a bit more sporadically for a while. Here’s hoping you all loved getting caught up on Michelle’s driveway gate plans yesterday. See what else we’ve been obsessed with in this week’s And Then We Tried Obsessions.

Fence Updates and Two-Panel Wood Driveway Gate Plans

Hellooooo, I’m thinking about fences again! You all had the pleasure of following along as I moved and rebuilt the fence in my backyard and then converted a chainlink fence into a wood fence along my driveway, and now it’s finally time to build that driveway gate. Of course, I can’t just build a driveway gate and leave it at that, I’ve also decided to cap the entire fence to cover up the dogear pickets and give everything a cleaner and more finished look. HOORAY!